BS EN 3160-2008 航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气冶炼的溶解处理和沉淀处理的棒材.a/D≤200mm、Rm≤1310MPa
时间:2024-05-23 21:05:23 来源: 标准资料网 作者：标准资料网 阅读：9628
【英文标准名称】:Aerospaceseries-SteelFE-PM3801(X5CrNiCu17-4)-Airmelted,solutiontreatedandprecipitationtreated,baraorD200mm,Rm1310MPa
【原文标准名称】:航空航天系列.FE-PM3801(X5CrNiCu17-4)型钢.空气冶炼的溶解处理和沉淀处理的棒材.a/D≤200mm、Rm≤1310MPa
【标准号】:BSEN3160-2008
【标准状态】:现行
【国别】:英国
【发布日期】:2008-06-30
【实施或试行日期】:2008-06-30
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:航空航天运输;航空运输;棒材;化学成分;交货条件;尺寸;硬度;热处理;材料;多语种的;杆材;溶解处理;航天运输;规范(验收);钢;熔炼类型
【英文主题词】:Aerospacetransport;Airtransport;Bars(materials);Chemicalcomposition;Deliveryconditions;Dimensions;Hardness;Heattreatment;Materials;Multilingual;Poles;Solutiontreated;Spacetransport;Specification(approval);Steels;Typeofmelting
【摘要】:
【中国标准分类号】:
【国际标准分类号】:49_025_10
【页数】:10P.;A4
【正文语种】:英语
【英文标准名称】:Washer-disinfectors-Part6:requirementsandtestsforwasher-disinfectorsemployingthermaldisinfectionfornon-invasive,noncriticalmedicaldevicesandhealthcareequipment.
【原文标准名称】:清洗消毒器具.第6部分:非侵入式,非关键医疗设备和保健设备用的利用热消毒的清洗消毒器具的试验和要求
【标准号】:NFS98-040-6-2011
【标准状态】:现行
【国别】:法国
【发布日期】:2011-06-01
【实施或试行日期】:2011-06-25
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:清洁处理;清洗设备;清洁机;定义(术语);消毒设备;消毒;消毒器;加热效果;热学;实验室器具;实验室器皿;医疗器械;医疗器材;规范(验收);试验;热的
【英文主题词】:Cleaning;Cleaningequipment;Cleaningmachines;Definitions;Disinfectionapparatus;Disinfections;Disinfectors;Effectofheating;Heat;Laboratoryapparatus;Laboratoryware;Medicaldevices;Medicalequipment;Specification(approval);Testing;Thermal
【摘要】:
【中国标准分类号】:C47
【国际标准分类号】:11_080_10
【页数】:19P;A4
【正文语种】:其他
Product Code:SAE J1211
Title:Handbook for Robustness Validation of Automotive Electrical/Electronic Modules
Issuing Committee:Automotive Electronic Systems Reliability Standards
Scope:SCOPEThis document addresses robustness of electrical/electronic modules for use in automotive applications. Where practical,methods of extrinsic reliability detection and prevention will also be addressed. This document primarily deals withelectrical/electronic modules (EEMs), but can easily be adapted for use on mechatronics, sensors, actuators andswitches. EEM qualification is the main scope of this document. Other procedures addressing random failures arespecifically addressed in the CPI (Component Process Interaction) section 10. This document is to be used within thecontext of the Zero Defect concept for component manufacturing and product use.It is recommended that the robustness of semiconductor devices and other components used in the EEM be assuredusing SAE J1879 OCT2007, Handbook for Robustness Validation of Semiconductor Devices in Automotive Applications.The emphasis of this document is on hardware and manufacturing failure mechanisms, however, other contemporaryissues as shown in Figure 1 need to be addressed for a thorough Robustness Validation. A Pareto of contemporaryissues is shown in Figure 1. Although this document addresses many of the issues shown, however some are outsidethe scope of this document and will need to be addressed for a thorough RV process application. Examples of issuesoutside the scope of this document are system interactions, interfaces, functionality, HMI (Human-Machine Interface) andsoftware. At the time of publication of this handbook, a system level Robustness Validation handbook, which addressesthese issues, had been initiated.